IROCK RAPID DEPLOYMENT SYSTEM MODEL RDS-15
The most powerful, versatile compact crushing and screening system on
the market today. Able to handle quarry rock, gravel, RAP, or recycle
concrete. The IROCK RDS-15 lends new meaning to versatility. Capacities
range up to 200 Tons Per Hour depending on material and site conditions. The
RDS-15 can make three products simultaneously - two sized and one
crusher run. Add an optional magnet and produce salvaged metal from
recycled concrete.
IROCKS' "I-flow" plant design allows the top screen deck oversize to
return to the crusher or discharge as a product; the second deck
oversize can do the same. This gives the end user the most flexible
plant flow possible, thanks to "I-flow" from IROCK.
The RDS-15 is also one of the best-balanced plants on the market. Each
component is mated to the system to produce a plant that optimizes the
plant's capabilities.
Options allow this plant to be fitted to exact job site requirements.
Contact IROCK for complete information and capabilities.
FEATURES OF THE IROCK RDS-15
HOPPER/FEEDER:
Full length fabricated steel plate hopper with supports. Vibrating grizzly
feeder with IROCK's exclusive 5' beveled grizzly section designed to fit
the 4043 impact crusher. This design maximizes the total inlet area to
increase production. Fabricated inlet chute and fines bypass chute.
HEAVY DUTY HORIZONTAL SHAFT IMPACT CRUSHER:
The 4043 hard rock crusher uses a solid one-piece rotor shaft. Ringfeder
locking assemblies fasten the heavy-duty rotor to the shaft. Alloy blow
bars are held in place by quick-change vertical wedges. The square rotor
shell is designed to allow maximum blow bar surface exposure to the incoming
feed material.
POWER:
Cat 400 hp diesel engine
 , 100 kW generator.
VIBRATING SCREEN:
Double deck incline vibrating screen with feed box.
CONVEYORS:
Wide under crusher/screen feed conveyor, under crusher impact tray.
Wide top deck side discharge conveyor. Flop gate on discharge chute to
direct material to be returned to the crusher or discharged as a product.
Wide second deck reversible, side discharge conveyor is reversible to
direct the flow of material to be returned to the crusher or discharged
as a product.
Wide re-circulating conveyor, full-length skirt boards, receiving hopper.
Wide under screen fines conveyor, full length receiving hopper.
RDS CHASSIS
Fifth wheel, triple axle chassis. PLANT FLOW:
The material to be processed is fed into the hopper. A vibrating feeder
conveys the material over the integral grizzly section of the feeder.
Sized material is bypassed through the grizzly section and around the
crusher to the under crusher conveyor; oversized material is fed into
the horizontal impact crusher. Crushed material is discharged onto the
under crusher/screen feed conveyor and combined with the bypassed
material. All the material on the conveyor is sent to the vibrating
screen. Material that is too large to pass the top deck is discharged
onto the top deck side discharge conveyor, which sends the oversize to
a flop gate chute where it can be sent to the return conveyor for
further processing or it can be discharged as a product.
Material that passes the first deck but not the second deck is
discharged onto the second deck side discharge conveyor where material
can be discharged as a sized product or the conveyor can be reversed to
send the product back for further crushing.
Material that passes through both screen decks is collected on the
under screen fines conveyor and discharged to an off plant conveyor as
a sized product.
Online Product Line brochure (PDF)
Download Product Line Power Point Presentation
Power Point Viewer -
2003 /
2007 |
